Signal Communication Products

SLT Series

image5

Unit provides protection against Transient Voltages that exceed nominal operating voltages of incoming data.  Each line is protected against surge current impulses up to 10kA

  • Protection from 7.5V to 220V
  • 4 to 8 Lines Protected
  • Protected Shield to Ground
  • Earth Ground Terminal on Both Sides
  • ETL Listed to UL497B
  • 15 Year Warranty

SLT-HEB Series

image6

 Unit provides protection against Transient Voltages that exceed nominal operating voltages of incoming data.  Each line is protected against surge current impulses up to 10kA

  • Protection from 7.5V to 220V
  • 4 to 8 Lines Protected
  • Protected Shield to Ground
  • Earth Ground Terminal on Both Sides
  • ETL Listed to UL497B
  • 15 Year Warranty

DRM-K Series

image7

 The custom configurable DRM-K assembly is used to optimize the interfaces between equipment and available mounting space.

  • Single Design Capable of Multifunction Uses
  • Mount Auxiliary and Optional Din Rail Equipment
  • Incorporate Surge Protection Directly with Critical Operating Systems

Port Patch Panel

image8

 The custom configurable DRM-K assembly is used to optimize the interfaces between equipment and available mounting space.

  • Single Design Capable of Multifuntion Uses
  • Mount Auxiliary and Optional Din Rail Equipment
  • Incorporate Surge Protection Directly with Critical Operating Systems

image10

Data/Networking Communications Products

DRM-K Series

image11

 The custom configurable DRM-K assembly is used to optimize the interfaces between equipment and available mounting space.

  • Single Design Capable of Multifuntion Uses
  • Mount Auxiliary and Optional Din Rail Equipment
  • Incorporate Surge Protection Directly with Critical Operating Systems

Port Patch Panel

image12

  The custom configurable DRM-K assembly is used to optimize the interfaces between equipment and available mounting space.

  • Single Design Capable of Multifuntion Uses
  • Mount Auxiliary and Optional Din Rail Equipment
  • Incorporate Surge Protection Directly with Critical Operating Systems

SLT-HEB Series

image13

 Unit provides protection against Transient Voltages that exceed nominal operating voltages of incoming data.  Each line is protected against surge current impulses up to 10kA

  • Protection from 7.5V to 220V
  • 4 to 8 Lines Protected
  • Protected Shield to Ground
  • Earth Ground Terminal on Both Sides
  • ETL Listed to UL497B
  • 15 Year Warranty

SLT Series

image14

 Unit provides protection against Transient Voltages that exceed nominal operating voltages of incoming data.  Each line is protected against surge current impulses up to 10kA

  • Protection from 7.5V to 220V
  • 4 to 8 Lines Protected
  • Protected Shield to Ground
  • Earth Ground Terminal on Both Sides
  • ETL Listed to UL497B
  • 15 Year Warranty

SLT CAT 5E

image15

 Unit provides protection against Transient Voltages that exceed nominal operating voltages of incoming data.  Each line is protected against surge current impulses up to 500A

  • Protects CAT5E Data Lines with 100Mbps & 100Mhz
  • Handles Surges up to 500A
  • Series Installation for Either Wall or Din Rail
  • Up to 8 Lines Protected 
  • ETL Listed to UL497B
  • 15 Year Warranty

SLT CAT 5 POE

image16

 Unit provides protection against Transient Voltages that exceed nominal operating voltages of incoming data.  Each line is protected against surge current impulses up to 200A

  • Protects POE Data Lines with 100Mbps & 100Mhz
  • Handles Surges up to 200A
  • Series Installation for Either Wall or Din Rail
  • Up to 8 Lines Protected 
  • ETL Listed to UL497B
  • 15 Year Warranty

SLT CAT6 POE

image17

  Unit provides protection against Transient Voltages that exceed nominal operating voltages of incoming data.  Each line is protected against surge current impulses up to 400A

  • Protects CAT6 Data Lines with 1000Mbps & 250Mhz
  • Handles Surges up to 400A
  • Series Installation for Either Wall or Din Rail
  • RJ45 (female to female) Connection Method 
  • ETL Listed to UL497B
  • 15 Year Warranty

SLT CAT6 DIN

image18

Unit provides protection against Transient Voltages that exceed nominal operating voltages of incoming data.  Each line is protected against surge current impulses up to 200A

  • Protects CAT6 Data Lines with 1000Mbps & 250Mhz
  • Handles Surges up to 200A
  • Series Installation for Either Wall or Din Rail
  • Configured for 10/100/1000 Ethernet Data or Similar Protocol
  • ETL Listed to UL497B
  • 15 Year Warranty

Telco/Telephony Communications Products

TLT Series

image20

Transient Voltage Surge Suppression for Telephony Line protocols.  Units provide protection against Transient Voltages that exceed the nominal operating voltage of Dial-Up, Dedicated/Leaded and T1 Lines.

  • Dial-up Lines, DDS Lines, T1/E1, Leased Lines
  • Series Installation
  • Din Rail or Wall Mountable
  • ETL Listed to UL 497A
  • Indoor/Outdoor Applications
  • 15 Year Warranty

DRM-K Series

image21

 The custom configurable DRM-K assembly is used to optimize the interfaces between equipment and available mounting space.

  • Single Design Capable of Multifuntion Uses
  • Mount Auxiliary and Optional Din Rail Equipment
  • Incorporate Surge Protection Directly with Critical Operating Systems

Port Patch Panel

image22

  The custom configurable DRM-K assembly is used to optimize the interfaces between equipment and available mounting space.

  • Single Design Capable of Multifuntion Uses
  • Mount Auxiliary and Optional Din Rail Equipment
  • Incorporate Surge Protection Directly with Critical Operating Systems

CCTV/CATV Communications Products

CLT Series

image23

The CLT Series provides Bidirectional Transient Voltage Surge Suppression for Coaxial BNC apps.  Surge protection voltages above 10V center core to shield and surge impulse currents up to 20kA.

  • Din Rail or Wall Mountable
  • Series Installation
  • Handles Surges up to 20kA
  • Insertion Loss of -3dB @ 250Mhz
  • ETL Listed to UL 479B
  • 15 Year Warranty

DRM-K Series

image24

 The custom configurable DRM-K assembly is used to optimize the interfaces between equipment and available mounting space.

  • Single Design Capable of Multifuntion Uses
  • Mount Auxiliary and Optional Din Rail Equipment
  • Incorporate Surge Protection Directly with Critical Operating Systems

Port Patch Panel

image25

  The custom configurable DRM-K assembly is used to optimize the interfaces between equipment and available mounting space.

  • Single Design Capable of Multifuntion Uses
  • Mount Auxiliary and Optional Din Rail Equipment
  • Incorporate Surge Protection Directly with Critical Operating Systems

Special Application Communications Products

SST Series

image26

Unit provides protection against Transient Voltages that exceed nominal operating voltages of incoming data.  Each line is protected against surge current impulses up to 10kA

  • Protection from 7.5V to 220V
  • 4 to 8 Lines Protected
  • Protected Shield to Ground
  • Earth Ground Terminal on Both Sides
  • ETL Listed to UL497B
  • 15 Year Warranty

image27

image28

.