top of page

SLT CAT6 POE

Ethernet (10/100/1000) Surge Protection Device

The SLT Series CAT6 POE provides fast clamping and high energy handling capability.

Unit provides protection against Transient Voltages that exceed the nominal operating voltage of incoming data. Each line is protected against surge impulses up to 400A. The SLT CAT6 POE device works in series with the communication lines being protected; diverting harmful transient energies, while maintaining a tight clamp at the peak voltage. Units are designed to operate in a wide temperature range and are configured for 10/100/1000 Ethernet data or similar protocol.

  • Protects CAT6 POE data lines with 1000Mbps & 250Mhz

  • POE up to 100W

  • Solid state fail-safe design

  • Low shunt capacitance to reduce signal loss

  • RJ45 (female to female) Connection Method

  • Performance tested to verify compliance

Unit provides protection against Transient Voltages that exceed nominal operating voltages of incoming data. Each line is protected against surge current impulses up to 400A.
Utility
Commercial
Industrial
Residential
Data/Comm

Data/Comm

3D Preview

Load Current
Max Surge Current (8/20) Iₘₐₓ
Short-Circuit Current Rating (SCCR)
Repetative Impulse Rating (Iₙ)
On/Off Status⬥
Housing Rating
Product Weight
Product Dimensions
Most Current Industry Standards
Surge Technology
Connector Form/ Type
Connector Method
Interface
Operating Temperature
Operating Frequency
Fusing
Listings & Certifications
Enclosure
Max. Operating Voltage
Max. Clamp Voltage
Energy Rating/ Wire
Response Time
Warranty
Series Resistance
Peak Pulse Power
Line - Load Sensitive
Breakover Voltage: (Line - Ground)
Attenuation Margin
NEXT
Data Transfer Rate
Power Sum NEXT
Return Loss
ACR
Power Sum ACR
ARC -F
PSACRF
Mounting
Relative Humidity
Terminals
Max. Circuits Protected
Modes of Protection
Continuous Current
Follow Current
Wire Range
Feedback
Remote Alarm Contacts
Remote Alarm contact capability (Nominal Volts/ Nominal Amps)
Remote Alarm Wire Size
Included Accessories
200 Amps
[See EDR Series]
60 grams (2.1 Ounces)
MOV
8P8C (RJ45)
Plug-in
-30 ℉ to +165 ℉ ( -34 ℃ to +74 ℃)
Polycarbonate
92 Volts
< 1 Nanosecond
3 Year Limited Product Warranty
1500 Watts Min. (6000 Max)
No
68 Volts
.3db @ 176MHz
>40dB
10/100/1000Mbps
47.8dB @ 248MHz
34.8dB @ 38MHz
Worse Case 17.0dB
Worse Case 14.9dB
27.4dB @ 245MHz
>38dB
35mm DIN or panel mount via 2 integrated tabs that accept up to #6 sized screws
95% noncondensing

Specifications

Specification
Value
Max Surge Current (8/20) Iₘₐₓ
200 Amps
Housing Rating
[See EDR Series]
Product Weight
60 grams (2.1 Ounces)
Surge Technology
MOV
Connector Form/ Type
8P8C (RJ45)
Connector Method
Plug-in
Operating Temperature
-30 ℉ to +165 ℉ ( -34 ℃ to +74 ℃)
Enclosure
Polycarbonate
Max. Clamp Voltage
92 Volts
Response Time
< 1 Nanosecond
Warranty
3 Year Limited Product Warranty
Peak Pulse Power
1500 Watts Min. (6000 Max)
Line - Load Sensitive
No
Breakover Voltage: (Line - Ground)
68 Volts
Attenuation Margin
.3db @ 176MHz
NEXT
>40dB
Data Transfer Rate
10/100/1000Mbps
Power Sum NEXT
47.8dB @ 248MHz
Return Loss
34.8dB @ 38MHz
ACR
Worse Case 17.0dB
Power Sum ACR
Worse Case 14.9dB
ARC -F
27.4dB @ 245MHz
PSACRF
>38dB
Mounting
35mm DIN or panel mount via 2 integrated tabs that accept up to #6 sized screws
Relative Humidity
95% noncondensing

Diagrams 

Not To Scale

Electrical Ratings

Click on any SLT CAT6 POE model from the table to request a quote

Model Number
TYPE
VPR
L-G (VPR)
MAX # Wires
Protocol
SLT-SM-080-BCL3-RJ/POE
DC
92V
68V
8
Closed Loop

NOTE: Installation is accomplished by simply inserting the Protector in series with the communication cable(s) and connecting the grounds as required. dB values obtained with a 300 ft long cable.

Compatibility Table

EDR Model Number
PVA50-1P-xxxv-S
PVA50-2P-xxxv-S
PVA50-3P-xxxy-S
PVA50-5P-xxxy-S
DRA50-1Pxxx-S
DRA50-2Pxxx-LGN
DRA50-2Pxxx-S
DRA50-3Pxxx-S
DRA50-3PSxxx-S
DRA50-4Pxxx-S
CLT-xxx
SLT CAT X/X-POE
SLT/XM-02-
SLT/XM-04-
SLT/XM-06-
SLT/XM-10-
TST010/XXX
TST020/(120-250v)
TST020/(24-48v)
TST040/XXX
bottom of page